Turning Point Mach3 Three Blade Stainless Steel Propeller - EX Model

Sale price $899.00 Regular price $999.00

Tax included. Shipping calculated at checkout.

Turning Point Mach3 Three Blade Stainless Steel Propeller only - EX Model.

Note that a Turning Point propeller hub kit needs to be purchased separately to the propeller.

Utilizing almost 40 years of race boat and high-performance prop design expertise, the Express Mach3 series of props captures all the best techniques and technologies available to get the most out of the boat.

Aggressive pitch angles, radical designs, sharp cup profiles, these 3 blade propellers excel at achieving maximum speed while delivering Best-in-Class handling and acceleration.

Upgrading your current propeller from aluminum to stainless steel, or from an old generation design to the latest technology, Express Mach3 Propeller is the best investment in boat improvement you can make. Today's New Designs will run circles around the competition and can make dramatic improvements in boat performance.

The gain in fuel economy can often pay for the cost of a new propeller in one or two seasons, making it a sound investment in your time on the water. Express Mach3 props are available for 9.9 (Bigfoot) to 300+hp outboards and sterndrives.

NOTE: Motors 200HP and above must use series 700 Hub Kits. Failure to use will void warranty.

Choosing your Turning Point propeller is a two-step process:

  1. This propeller suits the motors listed below. If your motor is not listed, see other Turning Point propellers
  1. CASSELL PART NUMBER PITCH / ROTATION DIAMETER MODEL
    TPT-202813 17" / Right 14.25" EX-1417
    TPT-202843 17" / Left 14.25" EX-1417-L
    TPT-202815 19" / Right 14.25" EX-1419
    TPT-202845 19" / Left 14.25" EX-1419-L
    TPT-202817 21" / Right 14.25" EX-1421
    TPT-202847 21" / Left 14.25" EX-1421-L
  2. Purchase the associated Hub Installation Kit which should suit the drive shaft on your outboard.
MANUF. SUITS MODEL SPLINES HUB KIT NOTES
Mercury & Mariner EFI CT / SeaPro : 90 to150hp / V6 & I6: 135 to 300hp / Verado 135 to 300hp(not HD) / OptiMax: 150, 200, 250hp 15 501 & 701 Use 701 Super Duty Kit for 200+hp Engines.
115hp ProXS CT Only; For ProXS & Verado w/ 1.25” prop shaft, use Mercury Solid Hub kit with the Turning Point Prop.
Mercruiser Alpha One and Bravo One ('83+) 15 501 & 701 Use 701 Super Duty Kit for 200+hp Engines.
If propeller strikes trim tab, replace with Mercury part #822777A1
Evinrude & Johnson V4 with V6 large gearcase: 100hp commercial, 120hp ('85),130hp ('95-'96), 140hp ('85), Pleasure ('95+): 115hp, 130hp /
H.O. (includes E-TEC H.O.): (25" shaft) 90, 115, 135, 150, 200, 225, 250hp
E-TEC (includes pontoon series - not for E-TEC G2): (25" shaft) 90hp, 115hp, 130hp ('09-'10), 135hp to 300hp / V6: 135hp to
250hp / V8: 250hp to 300hp
15 502  
Honda Cobra 800: 3.0 to 7.5L / King Cobra: 454, 502 / Sea Drive: 2.0 to 4.0L 15 502  
Volvo Penta SX & OMC SX Cobra: (19 spline) ('94+): 3.0 to 8.2L. Not available for Volvo DuoProp or Aquamatic drives 19 504  
Yamaha   15 505 Use 705 Super Duty Kit for 200+hp Engines.
If Express Mach3 OS Prop strikes trim tab, replace with part #6E5-45371-10-00
Honda BF115D, BF135, BF150, BF200 ('02-'12), BF225 ('02-'12). Use 707 Super Duty Kit for 200+hp Engines 15 507 & 707  
Suzuki DT 2 stroke: 150hp to 225hp. DF 4 stroke: 150 to 300hp. Use 707 Super Duty Kit for 200+hp Engines 15 507 & 707 Use Express Mach3 OS series props only
Tohatsu BFT115, BFT150, BFT200, BFT225, BFT250. Use 708 Super Duty Kit for 200+hp Engines 15 508 & 708  
Volvo Penta AQ; 200, 250, 270, 280, 290. (Use 4 blade props only) 17 510  
Evinrude E-TEC G2: G2 Series Only: 150 to 300hp 15 511  
Yamaha 2 and 4 stroke: 150 to 250hp / F300 (V6 only ‘09+) / Sterndrives 3.0 to 7.4L 15 705  
Johnson 4 stroke: 200hp, 225hp. (Use Express Mach3 OS series props only) 15 707  
Honda BF200A ('13+), BF225A ('13+), BF250A ('12+). Use 708 Super Duty Kit for 200+hp Engines 15 708  
Yamaha F350 15 715