Turning Point Hustler 4 Blade Aluminium Propeller - LE Model

Sale price $287.00 Regular price $319.90

Tax included. Shipping calculated at checkout.

Turning Point Hustler 4 Blade Aluminium Propeller - LE Model.

Note that a Turning Point propeller hub kit needs to be purchased separately to the propeller.

The Prop that put the “four” in Performance! Turning Point’s Four Blade Hustler revolutionized the aluminium propeller market when introduced over 6 years ago. No one had ever produced an aluminium propeller with two different blade shapes (they call it Dual Geometry) for 90-300+hp applications and a state-of-the-art Swept Cleaver design for 40-150hp applications.

These props re-wrote the rules, proving that you can run a four-blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers’ propellers.

The Hustler 4 blade series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, sterndrive boats, tri-toons, bay boats, and any vessel that can use a stern lift. It is our best upgrade of older aluminium designs from the ’70s, ’80s, '90s, and ’00s, and will outrun most newer props, including five blade ski props.

NOTE: Motors 200HP and above must use series 700 Hub Kits. Failure to use will void warranty.

Choosing your Turning Point propeller is a two-step process:

  1. This propeller suits the motors listed below. If your motor is not listed, see other Turning Point propellers
CASSELL PART NUMBER PITCH / ROTATION DIAMETER MODEL #
TPT-202426 15" / Right 15" LE-1515-4
TPT-202427 15" / Left 15" LE-1515-4L
TPT-202430 17" / Right 14.5" LE-1417-4
TPT-202431 17" / Left 14.5" LE-1417-4L
TPT-202432 19" / Right 14" LE-1419-4
TPT-202433 19" / Left 14" LE-1419-4L
TPT-202434 21" / Right 14" LE-1421-4
TPT-202435 21" / Left 14" LE-1421-4L
2. Purchase the associated Hub Installation Kit which should suit the drive shaft on your outboard
MANUFACTURER SUITS MODEL SPLINES HUB KIT NOTES
Mercury & Mariner EFI CT / SeaPro : 90 to150hp / V6 & I6: 135 to 300hp / Verado 135 to 300hp(not HD) / OptiMax: 150, 200, 250hp 15 501 & 701 Use 701 Super Duty Kit for 200+hp Engines.
115hp ProXS CT Only; For ProXS & Verado w/ 1.25” prop shaft, use Mercury Solid Hub kit with the Turning Point Prop.
Mercruiser Alpha One and Bravo One ('83+) 15 501 & 701 Use 701 Super Duty Kit for 200+hp Engines.
If propeller strikes trim tab, replace with Mercury part #822777A1
Evinrude & Johnson V4 with V6 large gearcase: 100hp commercial, 120hp ('85),130hp ('95-'96), 140hp ('85), Pleasure ('95+): 115hp, 130hp /
H.O. (includes E-TEC H.O.): (25" shaft) 90, 115, 135, 150, 200, 225, 250hp
E-TEC (includes pontoon series - not for E-TEC G2): (25" shaft) 90hp, 115hp, 130hp ('09-'10), 135hp to 300hp / V6: 135hp to
250hp / V8: 250hp to 300hp
15 502  
Honda Cobra 800: 3.0 to 7.5L / King Cobra: 454, 502 / Sea Drive: 2.0 to 4.0L 15 502  
Volvo Penta SX & OMC SX Cobra: (19 spline) ('94+): 3.0 to 8.2L. Not available for Volvo DuoProp or Aquamatic drives 19 504  
Yamaha   15 505 Use 705 Super Duty Kit for 200+hp Engines.
If Express Mach3 OS Prop strikes trim tab, replace with part #6E5-45371-10-00
Honda BF115D, BF135, BF150, BF200 ('02-'12), BF225 ('02-'12). Use 707 Super Duty Kit for 200+hp Engines 15 507 & 707  
Suzuki DT 2 stroke: 150hp to 225hp. DF 4 stroke: 150 to 300hp. Use 707 Super Duty Kit for 200+hp Engines 15 507 & 707 Use Express Mach3 OS series props only
Tohatsu BFT115, BFT150, BFT200, BFT225, BFT250. Use 708 Super Duty Kit for 200+hp Engines 15 508 & 708  
Volvo Penta AQ; 200, 250, 270, 280, 290. (Use 4 blade props only) 17 510  
Evinrude E-TEC G2: G2 Series Only: 150 to 300hp 15 511  
Yamaha 2 and 4 stroke: 150 to 250hp / F300 (V6 only ‘09+) / Sterndrives 3.0 to 7.4L 15 705  
Johnson 4 stroke: 200hp, 225hp. (Use Express Mach3 OS series props only) 15 707  
Honda BF200A ('13+), BF225A ('13+), BF250A ('12+). Use 708 Super Duty Kit for 200+hp Engines 15 708  
Yamaha F350 15 715